BearingNews
Sizing of ball bearing clearance for a motor shaft
by Markus Raabe
If angular contact ball bearings are used the axial clearance of the system has to be determined. This article shows how the...
JBG Ships its 10,000th LRU Kit to the DLA
Delivering Reduced Overheads and Improved Use of Manpower
JBG, an SDVOSB, is pleased to announce today that it has shipped its 10,000th Line-Replaceable Unit (LRU)...
New building insulation production line is a cut above – thanks...
Combating contamination in bearings is one of the single most effective ways to extend bearing life and consequentially to reduce the maintenance requirement of...
NSK Europe teamed up with TraceParts to publish its CAD models
CAD models from 29 different bearing producers are available for free in different CAD formats on the BearingNEWS page of the TracePartsOnline.net platform. You...
BearingNEWS becomes member of the EPTDA
Founded in 1998, EPTDA today is the largest organization in EMEA of distributors and manufacturers of mechanical power transmission and motion control products.
A unique...
Forged-Rolled Process Advances Sound Center Capability Beyond Reduction Ratio
TimkenSteel recently invested in a forge press that created a new forged-rolled process path to produce large bars (greater than 9 inches in diameter)...
NTN Has Big Plans in Anderson
Columbus-based NTN Driveshaft is considering bringing a $129 million production facility to Anderson, which could result in around 450 jobs. The Herald Bulletin report...
GGB Bearing Technology Video – Validating Customer Bearing Solutions
This 2:33 video presents GGB Bearing Technology’s comprehensive in-house testing capabilities. The knowledge gained from this testing helps assure consistent, high-quality bearing performance; superior...
The 100 Failure Modes of Lubrication and Lubrication Programs, Pt. 2
This is Part 2 in a series on the types of lubrication failure modes, and the proactive methods of preventing them. Please click https://www.bearing-news.com/the-100-failure-modes-of-lubrication-and-lubrication-programs-pt-1/ for...
